Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.
Today, the new daily crochet pattern Amigurumi Baby Doll Free Crochet Pattern, I want to give you some information about this pattern;
- Left leg
Knit inside out.
First you need to tie your fingers. Knit in circular rows in a spiral. - 2,3,4,5 fingers – 4 sc in the magic ring,
then knit in a circle 8 sc (two rows of 4 sc) - Thumb – 5 sc in magic ring;
then knit 10 sc in a circle (two rows of 5 sc each) Do not break the thread.
String your fingers on the pin. We knit from the thumb to the little finger. Start
knitting on top of the thumb, insert a marker. - 1 Thumb – 1 sc, inc
2 finger (index) – 2 sc
3 finger (middle) – 2 sc
4th finger (ring finger) – 2 sc
5 finger (little finger) – inc, 1 sc
Next, knit on the other side of the fingers:
5 finger (little finger) – 1 sc, inc
4th finger (ring finger) – 2 sc
3 finger (middle) – 2 sc
2 finger (index) – 2 sc
1 Thumb – inc, 1 sc, inc + 2 sc (to slightly shift
end/beginning of row, stop marker).
You should get 26 loops in a circular row.
Remove pin.
- Inc, 6 sc, inc, 4 sc, inc, 8 sc, inc, 4 sc (30) Bring out the threads sticking out of
fingers, inside the foot, fasten them and cut them off. Knots as desired
smear with transparent glue.
- – 5. 30 sc
Next, we start knitting the sole. - 25 sc, turn;
10 reverse sc, turn;
10 sc, turn;
dec, 6 reverse sc, dec, turn;
dec, 4 sc, dec, turn
6 reverse sc, turn;
6 sc, 4 sc in side threads; 1 sc in the foot, turn;
1 loop skip, 10 reverse sc,
4 reverse sc in the side threads on the other side, 1 sc in the foot, turn;
1 loop skip, 14 sc, 1 sc in the foot, turn;
Skip 1 loop, 14 reverse sc, 1 sc in the foot, turn;
1 loop skip, 14 sc, 1 sc in the foot, turn;
Skip 1 loop, 14 reverse sc, 1 sc in the foot, turn;
Skip 1 loop, 14 sc; 2 sc to the end of the row
Then knit in circular rows in a spiral.
- Front: 2 sc, 7 inc, 2 sc; skip 1 loop; then knit 16 sc (34)
- – 15. 34 sc
- 2 sc, dec, 16 sc, dec, 12 sc (32)
- 2 sc, dec, 12 sc, dec, 3 sc, dec, 6 sc, dec, 1 sc (28)
- 20 sc, 4 dec (24)
- 24 sc
- 7 sc, (inc, 1 sc) × 3 times – maple, 8 sc, dec, 1 sc (26)
- 26 sc
Insert the frame. The foot is 18 mm, and the wire is bent 15-16 mm, length
wire 9 cm.
The wire can be wrapped with a plaster so that the filler does not slip.
The excess length of the wire can later be bitten off with pliers.
Insert filler.
- 2 sc, dec, 16 sc, dec, 4 sc (24)
- 24 sc
- 3 sc, dec, 14 sc, dec, 3 sc (22)
- – 29. 22 sc
Cut off the excess wire if it is too long.
Insert filler - 2 sc, 3 dec, 14 sc (19)
- 1 sc, 2 dec, 14 sc (17)
Finish with filler. - 2 dec, 13sc (15)
Insert cotter pins 16 x 1.6 mm, metal washer 2.5 x 6 mm, disc 12 mm.
Slightly sloping back, stepping back from the edge of the 3rd row.
- 1 dec, 11 sc, 1 dec (13) finish with filler.
- (1 sc, dec) × 4 times, 1 sc (9)
Bind off slstdec × 4 times.
Bend the leg to the right (shape) to look like the left
leg.
- Right leg
First you need to tie your fingers.
- Thumb – 5 sc in magic ring; then knit 10 sc in a circle
- 2,3,4,5 fingers – 4 sc in the magic ring, then knit in a circle 8 sc
String fingers on a pin so that the little finger is strung last.
We knit from the little finger to the index finger. Set the little finger so that
the end of the row was on the side.
We start knitting on the little finger from above:
- 1 finger (little finger) – 1 sc, inc
2nd finger (ring finger) – 2 sc
3 finger (middle) – 2 sc
4th finger (index) – 2 sc
5th finger (big) – inc, 1 sc, inc, 1 sc, inc
Next, knit on the other side of the fingers (in a circle):
4th finger (index) – 2 sc
3 finger (middle) – 2 sc
2nd finger (ring finger) – 2 sc
1 finger (little finger) – inc, 1 sc; then add: 2 sc (shift
end/beginning of row) (26)
Next, knit in circular rows in a spiral: - Inc, 6 sc, inc, 4 sc, inc, 8 sc, inc, 4 sc (30)
- – 5. 30 sc
Hide the threads from the fingers inside the foot. - 26 sc, turn;
10 reverse sc, turn;
10 sc, turn;
dec, 6 reverse sc, dec, turn;
dec, 4 sc, dec, turn;
6 reverse sc, turn;
6 sc, 4 sc in side threads; 1 sc in the foot, turn;
1 loop skip, 10 reverse sc, 4 reverse sc in the side threads with
the other hand, 1 sc in the foot, turn;
1 loop skip, 14 sc, 1 sc in the foot, turn;
Skip 1 loop, 14 reverse sc, 1 sc in the foot, turn;
1 loop skip, 14 sc, 1 sc in the foot, turn;
Skip 1 loop, 14 reverse sc, 1 sc in the foot, turn;
Skip 1 loop, 14 sc; to the end of the row 1 sc. - Front: 2 sc, 7 inc, 3 sc; 15 sc (34)
- – 15. 34 sc
- 18 sc, dec, 12 sc, dec (32)
- 1 sc, dec, 12 sc, dec, 3 sc, dec, 6 sc, dec, 2 sc (28)
- 18 sc, 4 dec, 2 sc (24)
- 24 sc
- 8 sc, (inc, 1 sc) × 3 times – knee, 6 sc, dec, 2 sc (26)
- 26 sc
Insert frame. Foot length 18 mm. Wire length 9 cm. Insert
filler. - 1 sc, dec, 16 sc, dec, 5 sc (24)
- 24 sc
- 2 sc, dec, 14 sc, dec, 4 sc (22)
- – 29. Add filler for 22 sc
- 15 sc, 3 dec, 1 sc (19)
- 14 sc, 2 dec, 1 sc (17)
- 13 sc, 2 dec (15)
Insert cotter pin 16 × 1.6 ; disc 12 mm - Dec, 11 sc, dec (13)
- (1 sc, dec) × 4 times, 1 sc (9)
Close loops slst dec, ch, tighten. - Right hand
First we knit fingers: - Little finger, ring, middle, index fingers: 4 sc in magic ring,
then knit in a circle 12 sc (tie 4 fingers) - Thumb: 5 sc in magic ring, then knit in a circle for 15 sc.
String 4 fingers (little finger, ring finger, middle finger, index finger)
on a pin.
We start knitting from the little finger on top: - 1 finger (little finger) – 2 sc
2nd finger (ring finger) – 2 sc
3 finger (middle) – 2 sc
4 finger (index) – 4 sc
Next, knit on the other side of the fingers:
3 finger (middle) – 2 sc
2nd finger (ring finger) – 2 sc
1 finger (little finger) – 2 sb, knit 2 sb to shift the end / start
row. (16) - – 3. 16 sc
Now let’s attach the thumb: - Knit for PPP of the palm and PPP of the thumb: 3 sc; then knit on
palms: 13 sc - Knit 2 sc for the loops of the thumb; count from the marker 13 sc and into the 14th
sc (which was knitted in the 4th row behind the PPP) we knit: 1 sc; further on the palm we knit: 13
sc(16) - 2 sc, 3 dec, (inc, 1 sc) × 4 times – these increases are made on the outside of the arm (17)
- Inc, 4 sc, inc, 1 sc, inc, 9 sc (20)
- – 13. 20 sc
All reductions are done inside the hand. - Dec, 5 sc, dec, 11 sc (18)
- Dec, 4 sc, dec, 10 sc (16)
- 10 sc, 3 inc, 3 sc (19)
17.19 sc - Dec, 2 sc, dec, 13 sc (17)
- 2 dec, 13 sc (15)
- dec, 13 sc (14)
- – 24. 14 sc
We insert a 7 mm disc and a 16 × 1.2 cotter pin. Insert the wireframe and
filler. - 4 sc, (dec, 1 sc) × 2 times; 2 dec (10)
- Close the loops slst dec, ch, tighten.
- Left hand
First we knit fingers: - Little finger, ring finger, middle finger, index finger: 4 sc in magic ring,
then knit in a circle 12 sc (tie 4 fingers)
- Thumb: 5 sc in magic ring, then knit in a circle for 15 sc.
String 4 fingers (little finger, ring finger, middle finger, index finger) onto a pin.
We start knitting from the little finger on top: - 1 finger (index) – 2 sc
2 finger (middle) – 2 sc
3rd finger (ring finger) – 2 sc
4 finger (little finger) – 4 sc
Next, knit on the other side of the fingers:
3rd finger (ring finger) – 2 sc
2 finger (middle) – 2 sc
1 finger (index) – 2 sc, knit 2 sc to shift the end / start
row. (16) - – 3. 16 sc
Now let’s attach the thumb:
4.4 sc, inc connect the thumb: knit behind the PPP of the thumb and PPP
palms 3 sc; then we knit along the palm to the end of the row: 9 sc - 4 sc in the palm of your hand; 1 sc in sc (with which we attached the thumb for PPP
in the previous row); 2 sc for the remaining two loops of the thumb; to end
row: 9 sc (16)
Increases are made on the outside of the arm, decreases are made on the inside of the arm. - 1 sc, 3 dec, (inc, 1 sc) × 4 times, 1 sc (17)
- Inc, 4 sc, inc, 1 sc, inc, 9 sc (20)
- – 13. 20 sc
- Dec, 5 sc, dec, 11 sc (18)
- Dec, 4 sc, dec, 10 sc) 16)
- 10 sc, 3 inc, 3 sc (19)
17.19 sc - Dec, 2 sc, dec, 13 sc (17)
- 2 dec, 13 sc (15)
- Dec, 13 sc (14)
- – 24. 14 sc
Cotter pin 16 × 1.2; disc 7 mm. Insert frame and filler. - 4 sc, (dec, 1 sc) × 2 times, 2 dec (10)
- Close the loops slst dec ch, tighten.
- Torso
- 3 ch
- From the 2nd loop we knit: 2 inc, in half loops on the other side: 2 inc (8)
3.8 inc - 6 sc, 10 inc (26)
- 8 sc, (inc, 1 sc) × 9 times (35)
- 10 sc, (inc, 3 sc) × 6 times, inc (42)
- 42 sc
- 12 sc, (inc, 3 sc) × 7 times, 2 sc (49)
- – 10. By 49 sc
11.24 sc, skip 10 stitches, knit 11: 15 sc (39) - 8 sc, 6 inc, 20 sc, 5 inc (50)
Sew the buttocks. - Inc, 8 sc, (inc, 3 sc) × 3 times, 7 sc, 2 dec, 7 sc, (3 sc, inc) × 2 times, 3
sc (54) - Inc, 29 sc, dec, 2 sc, dec, 18 sc (53)
- 30 sc, dec, 4 sc, dec, 15 sc (51)
Insert legs on 15 mm discs. - 28 sc, dec, 6 sc, dec, 13 sc (49)
- 26 sc, dec, 8 sc, dec, 11 sc (47)
- 47 sc
- 23 sc, dec, 5 sc, dec, 5 sc, dec, 8 sc (44)
- 22 sc, dec, 13 sc, dec, 5 sc (42)
- 21 sc, dec, 12 sc, dec, 5 sc (40)
- 20 sc, dec, 2 sc, dec, 4 sc, dec, 2 sc, dec, 4 sc (36)
- 36 sc
- 20 sc, dec, 8 sc, dec, 4 sc (34)
- – 31. 34 sc
Insert your hands on the 12 mm discs. - 3 dec, 9 sc, 4 dec, 9 sc, dec (26)
- 2 dec, 7 sc, 3 dec, 7 sc, dec (20)
- 2 dec, 4 sc, 3 dec, 4 sc, dec (14)
- – 36. 14 sc
- 7 sc, dec, 3 sc, dec (12)
- 12 sc
- 8 sc, dec, 2 sc (11)
40.- 56. 11 sc - 5 dec, 1 slst.
6.Head
Face side out
- 14 sc in magic ring
- – 16. 14 sc
Pull over the neck, fasten the wire.
Next, knit inside out.
17.14 inc (28) - (1 sc, inc) × 14 times (42)
- (6 sc, inc) × 6 times (48)
- (7sc, inc) × 6 times (54)
- (8 sc, inc) × 6 times (60)
- (9 sc, inc) × 6 times (66)
- (5 sc, inc, 5 sc) × 6 times (72)
- (11 sc, inc) × 6 times (78)
- (6 sc, inc, 6 sc) × 6 times (84)
- (13 sc, inc) × 6 times (90)
- (7 sc, inc, 7 sc) × 6 times (96)
- (15 sc, inc) × 6 times (102)
- (8 sc, inc, 8 sc) × 6 times (108)
- 52 sc, 2 dec, 52 sc (106)
- (3 sc, dec) × 4 times, 32 sc, dec, 32 sc, (dec, 3 sc) × 4 times (97)
- Dec, 95 sc (96)
- – 35. By 96 sc
- 48 sc, (4 sc in 1 loop) × 2 times, 46 sc (102)
Solve with decreases in 37 and 38 rows. We need to make sure that they are not each other.
over another. - 26 sc, (3 sc, dec) × 3 times, 4 sc, dec, 12 sc, dec, 4 sc, (dec, 3 sc) × 3 times, 22
sc (94) - 29 sc, dec, 4 sc, dec, 4 sc, dec, 12 sc, dec, 4 sc, dec, 4 sc, dec, 25 sc (88)
- 40 sc, 6 dec, 36 sc (82)
- 14 sc, inc, 4 sc, inc, 4 sc, inc, 4 sc, inc, 26 sc, inc, 4 sc, inc, 4 sc, inc, 4 sc,
inc, 10 sc (90) - 12 sc, inc, 4 sc, inc, 4 sc, inc, 4 sc, inc, 18 sc, 2 dec, 18 sc, inc, 4 sc, inc, 4
sc, inc, 4 sc, inc, 6 sc (96)
Deal with the height of the forehead in the following rows. - – 56. 96 sc each
- (7 sc, dec, 7 sc) × 6 times (90)
- (13 sc, dec) × 6 times (84)
- (6 sc, dec, 6 sc) × 6 times (78)
- (11 sc, dec) × 6 times (72)
- (5 sc, dec, 5 sc) × 6 times (66)
- (9 sc, dec) × 6 times (60)
- (4 sc, dec, 4 sc) × 6 times (54)
- (7 sc, dec) × 6 times (48)
- (3 sc, dec, 3 sc) × 6 times (42)
- (5 sc, dec) × 6 times (36)
- (2 sc, dec, 2 sc) × 6 times (30)
- (3 sc, dec) × 6 times (24)
- (1 sc, dec, 1 sc) × 6 times (18)
- (1 sc, dec) × 6 times (12)
71.dec × 6 times (6) - Close the loops.
- Ears
2 details.
Knit in turning rows. - 8 sc in the magic ring, turn, tighten.
- 1 sc, 4 inc (12), turn.
- 12 sc
Left ear: fold over the edge and knit (this will be the top of the ear) through the middle (in the magic ring) 1 slst; then tie in a circle: 2 sc in the side threads; 12 sc; 1slst; ch 1, tighten the thread.
Right ear: bend in the opposite direction, so that you get the top
right ear; 1cc in magic ring (middle), then tie in a circle: 12 sc, 2 sc in
side threads; 1slst, ch 1, tighten.
- Dress
Iris, hook 0.8
Rotary rows, raglan - ch 30
- From the 2nd loop we knit: 5 sc, 3 sc in 1 loop, 4 sc, 3 sc in 1 loop, 6 sc, 3
sc in 1 loop, 4 sc, 3 sc in 1 loop, 6 sc (37)
- 7 sc, 3 sc in 1 stitch, 6 sc, 3 sc in 1 stitch, 8 sc, 3 sc in 1 stitch, 6 sc,
3 sc in 1 loop, 6 sc (45) - 7 sc, 3 sc in 1 stitch, 8 sc, 3 sc in 1 stitch, 10 sc, 3 sc in 1 stitch, 8 sc,
3 sc in 1 loop, 8 sc (53) - 9 sc, 3 sc in 1 stitch, 10 sc, 3 sc in 1 stitch, 12 sc, 3 sc in 1 stitch, 10
sc, 3 sc in 1 loop, 8 sc (61) - 9 sc, 3 sc in 1 stitch, 12 sc, 3 sc in 1 stitch, 14 sc, 3 sc in 1 stitch, 12
sc, 3 sc in 1 loop, 10 sc (69 - 11 sc, 3 sc in 1 stitch, 14 sc, 3 sc in 1 stitch, 16 sc, 3 sc in 1 stitch, 14
sc, 3 sc in 1 loop, 10 sc (77) - 11 sc, 3 sc in 1 loop, (1 sc, 2 S1N in 1 loop) × 7 times, 2 sc, 3 sc in 1
loop, 18 sc, 3 sc in 1 loop, 2 sc, (2 C1H in 1 loop, 1 sc) × 7 times, 3 sc
in 1 loop, 12 sc (99) - 14 sc, 12 ch, skip 25 loops, with the 26th knit (corner): 22 sc, 12 ch,
skip 25 loops, with the 26th we knit: 13 sc (73) - Insert a mint-colored thread (do not tear off the white one): 73 sc
- Mint color: 73 sc. Cut the mint thread, fasten.
- We knit with a white thread: 73 sc
13.34 sc, 3 sc in 1 stitch, 4 sc, inc, 4 sc, 3 sc in 1 stitch, 28 sc (78)
14.- 15. 78 sc - Knit for NPP: 78 sc
On the other hand, free half loops should remain. - 78 sc
- 1 sc, (1 sc, 2 С1Н in 1 loop) × 38 times, 1 sc – edge binding
Attach the pink thread to the inner loose semi-loops. - We knit for the runway: 78 sc
- 78 sc
- 4 sc, (1 sc, inc) × 35 times, 4 sc (113)
- – 36. 113 sc
- Tie the edge with a crustacean step (these are reverse columns)
Sew fasteners with the left end. Hide threads.
In blue and lilac and yellow, embroider sprinkles / sticks on the hem and
the bottom of the top.
Bow
Knit in turning rows.
- 9 ch
- From the 2nd loop we knit: 8 sc
- – 6. 8 sc
Sew in the middle.
Sew on the front of the dress.
- Briefs
Yarn Iris blue, hook 0.6
Leave a piece of thread 20 cm
Knit in turning rows. - 31 ch
- From the 2nd loop we knit: 30 sc
- – 4. 30 sc
Attach the thread to the 7th loop from the edge, and knit from the same loop:
5.16 sc, turn. - Dec, 12 sc, dec (14)
- Dec, 10 sc, dec (12)
- Dec, 8 sc, dec (10)
- Dec, 6 sc, dec (8)
- Dec, 4 sc, dec (6)
- – 21. 6 sc
- Inc, 6 sc, inc (10)
- Inc, 8 sc, inc (12)
- Inc, 10 sc, inc (14)
- Inc, 12 sc, inc (16)
- Inc, 14 sc, inc (18)
- Inc, 16 sc, inc (20)
- 20 sc
- 6 ch, on the other hand, attach the thread (this is the left piece of thread) and
knit: 5 ch, fasten the thread.
Next, we knit with the main thread from the 2nd loop; we knit: 30 sc. - – 32. 30 sc
Hide threads. Sew fasteners. Decorate as desired
- Boots
Yarn Iris, hook 0.6
Knit in circular rows in a spiral.
In total, knit 4 insoles (soles), 2 for each shoe. - 6 ch
- From the 2nd loop we knit: 4 sc, 3 sc in 1 loop, for half-loop on the other
sides we knit: 4 sc, in the loop that we missed at the beginning, we knit: 3 sc
in 1 loop (14) - 4 sc, 3 inc, 4 sc, 3 inc (20)
- 4 sc, (inc, 1 sc) × 3 times, 4 sc, (inc, 1 sc) × 3 times (26)
- 4 sc, (inc, 2 sc) × 3 times, 4 sc, (inc, 2 sc) × 3 times (32)
- 4 sc, (inc, 3 sc) × 3 times, 4 sc, (inc, 3 sc) × 3 times (38)
- 4 sc, (inc, 4 sc) × 3 times, 4 sc, (inc, 4 sc) × 3 times (44)
- 4 sc, (inc, 5 sc) × 3 times, 4 sc, (inc, 5 sc) × 3 times (50)
- 4 sc, (inc, 6 sc) × 3 times, 4 sc, (inc, 6 sc) × 3 times (56)
10.4 sc, (inc, 7 sc) × 3 times, 4 sc, (inc, 7 sc) × 3 times (62)
Knit 2 parts for one shoe, iron with an iron.
Put the sole with the wrong side down, cut the insole out of plastic along
shape of the sole, stick it on double-sided tape.
Put the second sole on top.
We proceed to the connection of the two soles.
11.62 sc – knit in a circle, inserting a hook into the loops of two soles.
Change the thread color to white.
12.– 13. 62 sc each
14.62 sc per FOD (RWY)
15.– 17. 62 sc each - 10 sc, (dec, 2 sc) × 5 times, dec, 30 sc (54)
- 8 sc, (dec, 2 sc) × 5 times, dec, 10 sc, dec, 10 sc, dec, 2 sc (48)
- 6 sc, (dec, 2 sc) × 5 times, dec, 20 sc (42)
- – 27. 42 sc
For the left PPP (NPP) knit a harness: (sc, 2 C1H in 1 loop) × 31 times (up to
end of row)
In this case, keep the boot turned upside down.
Hide all threads.
Insert cling film or plastic bag, stuff the shoe to
shape straightening.
Prepare a solution of PVA glue with water 1: 1. Impregnate the boot and give
dry completely (24 hours).
Repeat all steps for the second boot.
Bunny ears
2 parts for 1 shoe (4 parts in total)
Rotary rows.
white yarn
We knit 2 parts for 1 shoe. (total 4 parts)
- 10 ch
- From the 2nd loop we knit: 9 sc
- – 6. 9 sc
- Dec, 5 sc, dec (7)
- 7 sc
- Dec, 3 sc, dec (5)
- 5 sc
- Dec, 1 sc, dec (3)
- 3 sc
- Dec, 1 sc (2)
Fasten the thread.
The inner part of the ear.
Rotary rows.
2 parts for 1 shoe (4 parts in total).
Soft pink color. - 4 ch
- From the 2nd loop we knit: 3 sc
- – 7. 3 sc
- dec, 1 sc (2)
- kill, fasten the thread.
Sew the pink piece over the white. Roll up and sew the bottom corners
white triangle (like an envelope)
Repeat all steps for the remaining three ears.
Bow
Blue thread.
Rotary rows.
- 15 sc
- From the 2nd loop we knit: 14 sc
- – 7. 14 sc for RFP
8.14 sc for IFR.
Pull the bow in the middle. Wrap thread around the middle.
Sew a bow on the back of 2 ears.
Sew on the front of the boot, embroider eyes, sew on tresses.
FINISH