AMİFURUMİ FREE PATTERNS, amigurumi, amigurumi doll, amigurumi free patterns, Amigurumi toys, Beauty

Amigurumi Baby Doll Free Crochet Pattern

Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Don’t forget to subscribe to receive notifications of our new free recipes.

Today, the new daily crochet pattern Amigurumi Baby Doll Free Crochet Pattern, I want to give you some information about this pattern;

ABBREVIATION used in the template:
SC ——– single crochet
INC——— addition / 2SC in 1 loop
W——– double addition / 3СБН in 1 loop
M——— double decrease / 3SC knit 1 loop
DEC ——— decrease
MAGIC RING——- Amigurumi ring
CH ——– double crochet
INC-CH—— addition of double crochets

  • ——- Repeat the instructions in parentheses the specified number of times
    Stitch marker — Mark the beginning of the row

 Flesh thread Kartopu KOD: K1219 (THREAD NOT PRODUCED) – for hook 2.5
mm (instead of Kartopu thread, you can use LANOSO ALARA COTTON COD: C: 937-P:
144 or other thread. The hook must be thinner than indicated on the instructions for
• Gazzal baby coton threads white – CODE: 3432 (for a diaper) – hook 2.0 mm.
• Red Gazzal baby coton – CODE: 3439 (for clothes) (For bow and blouse you can
use another thread equivalent to gazzal, which will be thinner than thread for the body).
• 12 mm brown safety eyes.
 Filler
• Wire (for doll frame)
• Adhesive plaster (to cover the ends of the wire)
 Tesses (finished hair)
• Ready-made eyelashes for the doll and black sewing thread for sewing.
• Pink thread for embroidering lips.
• Brown thread for embroidery of eyebrows (the thread used for the doll is alize diva)


1) magic ring in 6sc
2) 6inc = 12sc
3) 4*(ınc ,2sc)= 16sc
4-6) 16sc (3 rows)
7) 1 popcorn, 15sc

8) 16sc
9) above the finger (UB ,6sc)*2 =14sc
10-24) 14sc, 1 SP finish. (15 rows) (place wire in it and stuff
At the end of the second hand, knit another 4sc, 1st and cut the thread. pollen on
hand should be inside, on the first hand we do not tie 4sc

1) magic ring in 6sc
2) sc, ınc (total 7sc) Tighten the loop and knit a chain of 7 ch, 1 ch
skip and start in 2 sts from hook (on chain 6sc, on finger
7sc, chain 6sc)=19sc

3-7) 19sc (5 rows)

8) We knit the heel.
1sc, turn, 9sc turn, 8sc turn, 7sc turn, 6sc turn, 5sc
turn, 4sc. At the beginning of each row, skip 1 stitch, due to this
get a decrease.

9) We tie the foot in a circle. When you get to the front work 7st = 19sc
Foot binding: 3sc, dec, 7sp, dec, 3sc( decrease must be in the corners)

Set marker stitch.

10-20) 19sc (11 rows)

21) For the knee, we knit 4 additions in front, if necessary, knit
sc to these loops; (Knee: 11sc, 4ınc,4sc = 23sc)

22) To form the knee, we knit 4 decreases. (Knee: 4dec, 15sc=
23) 19sc
24) To knit a beautiful leg, in the 22nd row, knit in the back 4ınc if required,
work sc to these stitches. (Explanation: 4ınc, 15sc = 23sc)
25-31) 23sc (7 rows)
32) 1st cut and hide the thread. (The connection of the two legs will be done with a thread
from the right leg.)

The only difference between knitting the left foot from the right foot is the 8th row.
Knit 11sc in Row 8 (this is to adjust the direction of the finger.)
Then we turn and work 9sc turn, 8sc turn, 7sc
turn, 6sc turn, 5sc turn, 4sc.
1) magic ring in 6sc
2) sc, ınc (total 7sc) we knit a chain of 7 VPs, starting with 2VP from
hook. 6sc chain, 7sc finger, 6sc chain = 19sc
3-7) 19sc (5 rows)
8) We knit the heel.
11sc turn, 9sc turn, 8sc turn, 7sc turn, 6sc turn, 5sc
turn, 4sc.
9) We tie the foot in a circle. When you get to the front, work 7 st =
Foot binding: 3sc, dec, 7sp, dec, 3sc (reduction should be in the corners).
10-20) 19sc (11 rows)
21) For the knee, we knit 4 additions in front, if necessary, knit sc
up to these loops; (Knee: 11sc, 4ınc,4sc = 23sc)
22) To form the knee, we knit 4 decreases. (Knee: 4dec, 15sc=
23) 19sc
24) To knit a beautiful leg, in the 22nd row, knit in the back 4ınc if required,
work sc to these stitches. (Explanation: 4Inc, 15sc = 23sc
25-31) 23sc (7 rows)
32) In this row, the legs will be connected. Don’t cut the thread. it
there will be 1 row of the body.

1) We continue along the right leg 11sc, 2 ch (we knit the joint venture into the left leg),
on the left leg 23sc, on the chain 2sc, on the right leg 12sc, place
marker – this will be the beginning of a new row = 50 sc
(The beginning of the row will be from the place marked with a red thread on the right
doll leg.)

10) Formation of the buttocks. We knit relief.
Explanation: 3sc ,4(sc,dec ), skip 10 sc, 4(sc,dec),34 scН = 53sc
(In other words, 8 decreases will be connected 4 on the right, 4 on the left. On the stomach
knit evenly.)
11) 53sc
12) We knit a row with decreases.
Explanation: 3sc, 6(dec, sc ), 32sc = 47sc 13) 47sc 14) 27sc, 4(dec, sc), 6sc, dec = 42sc
14) 18sc, dec, 20sc, dec = 40sc
15) (Decrease from left and right) 17sc, dec, 19sc, dec = 38sc
16) (Decrease from left and right) 17sc, dec, 17sc, dec = 36sc
17) (Decrease from left and right) 16sc, dec, 17sc, dec = 34sc
(Because the last decrease corresponds to the last stitch of the row and
the first stitch of the next row, the shift is 1 stitch)

19-21) 34sc (3 rows)
22) We tie our hands. Hand knitting occurs with 3 stitches. Indicated by pins on
1 photo below. We start by knitting the right hand 3sc arm + body, 14sc, 3sc
left hand + body, 13sc, 1dec (Decrease, may go to the beginning of the 23rd row.)

  1. From here we begin to knit with a decrease between the hand and the body,
    we knit the shoulder.
    The first decrease coincided with the last stitch of row 22 and the beginning of row 23
    23) In this row we make 4 decreases in the corners of the arms = 46sc
    Explanation: dec (Using a loop from 22 rows), 9sc, dec, 12sc, dec, 9sc, dec,
    12sc = 46sc
    24) Decrease in the corners of the arms = 42sc
    Explanation: dec, 7sc, dec, 12sc, dec, 7sc, dec, 12sc = 42sc
    25) Decrease in the corners of the arms = 34sc
    Explanation: 2dec, 2sc, 2dec, 11sc, 2dec, 2sc, 2dec, 11sc= 34sc
    26) In the area of ​​​​the shoulder, we knit 3sc together. Let’s reduce the total by
    4stitches = 30sc
    Explanation: sc, M, 14sc, M, 13sc= 30sc
    27) In the area of ​​​​the shoulder, we knit 3sc together. Total decrease by 4 stitches = 26sc
    Explanation: 2( M, 12SBN) =26sc 28) In the shoulder area, knit 1 decrease = 24sc Explanation: 2 (dec, 11sc) = 24sc
    29) Each side will be reduced by 1 stitch, and we knit a decrease by
    the last two stitches (we make a decrease in the last two loops of this row, so
    how does the shift occur when decreasing.) \u003d 21sc
    Explanation: dec, 10sc, dec, 8sc, dec = 21sc
    30) One side will be reduced by 1 stitch (because the decrease was
    completed on the last stitch of the 29th row), on the other hand, we will
    knit 2 dec = 18x (finish and leave long to sew on
    head). =18sc Explanation: dec, 7sc, 2dec, 9sc,1SP =18sc (Here at the end
    we knit 9sc so that the joint venture is on the side. So that the end of the thread comes out from the side
    heads. If it is in front, when sewing on the head, it may not look

1) magic ring in 6sc
2) 6Inc = 12sc
3) 6(sc, ınc) = 18sc 4) 6(2sc, ınc) = 24sc
5) 6(3sc, ınc) = 30sc 6) 6(4sc, ınc) = 36sc
7) 6(5sc, ınc) = 42sc 8) 6(6sc, ınc) = 48sc
9) 6(7sc, ınc = 54sc 10) 6(8sc, ınc) = 60sc
11-18) 60sc (8 rows)
19) We make a decrease on the front part. (The pins show where
reduction is made). The eye will be inserted between 19-20 rows at a distance
6 stitches between them.
Explanation: 17sc, 6*(dec, 2sc), 19sc = 54sc

20) From this row we knit 6 additions on the face.
17sc, 6(ınc, 2sc), 19sc= 60sc 21) Cheeks; We knit 8 additions, 4 on one side and 4 on the other sides of the nose. Increments start before the first increase 20 glad. 17sc, 4(ınc, sc), 3sc, 1POPcorn(3 dc in 1 st), 4sc, 4* (ınc, sc) , 19sc= 68sc
22-27) 68sc (6 rows)
28) We make a reduction to form the cheeks, in those places where we knitted
additions. 4 for the left cheek, 4 for the right cheek for 8 stitches.
17sc, 4(dec, sc), 8sc, 4(UB, sc), 19sc= 60sc
29) 6(dec, 8sc)=54 30) 6(dec, 7sc)=48
31) 6(dec, 6sc)=42 32) 6(dec, 5sc)= 36
33) 6(dec, 4sc)=30 34) 6(dec, 3sc)=24
35) 6*(dec, 2sc) =18 SP cut the thread.

BETWEEN TWO EYES. Attach the eyes without filling the inside
heads. We will not make a tightening for the eyes, since we knitted the shape of the head with
considering the eyes.
Careful filling is required when filling the head. especially beautiful
fill your cheeks. If you fill too tightly, you will stretch the fabric of the head and
it will not be beautiful if you fill in loose, rounded lines such as cheeks,
lose their contours.
After attaching the eyes to the head and filling the head with fiber, before
sew the head to the body, perform processes such as eyebrow embroidery and
eyelash bonding.

EYEBROWS: We start with the 16th row.
We use a long eyebrow embroidery needle, this will make your work easier. As on
In Figure 1, we pass the needle through the cavity of the neck, which we left open.
for sewing on the head, and bring the needle 1 row above the eyes. We embroider
the first eyebrow through 4 stitches diagonally across the row, as in figure 2, and
Let’s move on to the second brow. In Figure 4 we tie the two ends of the yarn into a knot,
after embroidery. Be careful when tying a knot if you
tighten too much, the brows will look drawn and not pretty.

We cut the finished eyelash for dolls into 2 parts. It can be cut into approx.
1 cm, but it depends on your preference. To make eyelashes thick, I do
two layers, so I cut out 4 pieces for both eyes. Sew on a thin eyelash
black sewing thread or ghost thread and a fine needle. note
to the direction of the eyelashes. They should be curved from the eye to the eyebrow.
Sewing on eyelashes can be a little tricky. After sewing eyelashes
with a flesh-colored thread we embroider the eyelid above the eyelashes (do this right on top
eyes, otherwise the eyelash does not rise). It makes the lashes prettier and neater, and
the thread looks like an eyelid.

MOUTH: First, we determine the places for the mouth. We define it at the level of the nose with
with an interval of 2 stitches between the 27th and 28th rows.
PREPARATION: We insert the needle into the crowns, as in Figure 1. You will only leave in
the top of the head with a long end of the thread to tie it later. Output
needle through a pre-determined place for the mouth. As in Figure 2, we output
needle to the left, skipping 2 stitches, and bring the needle out from the top of the head. Not
withdraw the needle to the same place where the needle was inserted. As in Figure 3, we tighten
thread, forming a mouth, and tie two threads well. Hiding in the last step
the ends of the threads inside the head so that they are not visible. This can be done at
help of a needle. If a dimple appears on the head, it’s okay, since the head
will be covered with hair.

WE KNIT THE LOWER SPONGE. Figure 4. Leave a long thread first: in magic ring 4sc,
do not tighten the ring. Insert the right lip thread, using the needle we
tied, see Figure 5, through the right side of the place where we previously
formed a mouth, and take it out of the cervical cavity of the head. Pass the left thread
lips, with a needle, on the left side of the mouth, as in Figure 6,
take it out of the cervical cavity of the head and tie the ends of the two
EARS: SEW BETWEEN 20 AND 23 ROWS. In the middle of the eye, between the eye
and the ear should get 6 stitches. First work 5sc in magic ring. Both ends
leave the threads long. We sew the ear, as in the Figure, using a needle.
Thread one end of the thread through the needle. Insert the needle from top to bottom, and bring out 3 rows
below. Bring the second thread to the lower point of the ear and tie a small
knot. Hide the threads in your head.

DIAP ( White GAZZAL threads, hook 2.00mm)
 We knit the diaper with additions and decreases.
 We knit in rotary rows.
1) Start with a chain of 57 ch from 2ch from the hook, knit 56sc.
2-5) 56sc (4 rows.)( At the end of each row, knit 1ch and turn
6) 9 SP 1 ch, 36sc, 1 dec, (At the end of each row we knit 1ch and turn
work.) Note: Also decrease at the beginning of the row.)
7) Skip 1 stitch and start knitting from 2 loops (Repeat this process up to 15 rows in
beginning of each row.) 34sc, 1 dec
8) 32sc, 1 dec = Total 33sc
9) 30sc, 1 dec = 31sc
10) 28sc, 1 dec = 29sc
11) 26sc, 1 dec = 27sc
12) 1 dec, 20sc, 2 UB = 23sc
13) 1 dec, 16sc, 2 UB = 19sc
14) 1 dec, 12sc, 2 UB = 15sc
15) 1 dec, 8sc, 2 UB = 11sc
16-26) 11sc (11 rows)
27) 1 ınc, 9sc, 1ınc = 13sc
28) 1 ınc, 11sc, 1 ınc = 15sc
29) 1’nc, 13sc, 1’nc = 17sc
30) 1 inch, 15sc, 1 inch = 19sc
31) 8 ınc, with 2 ınc from the hook. (on the left, fasten the thread and knit 8ch and tighten
thread.) We continue to knit from right to left. Total should be 33sc
(EXPLANATION: 19 sc, 7 sc on one side of the chain and 7 sc on the other
side of the chain = 33 stitches.)
32-36) 33sc
37) Tie the entire diaper (2ch, 1st) in each loop (the goal is to
to make panties beautiful). We knit in each loop, in the corner
knit twice.

If your yellow thread is thick, you can divide it into several threads for embroidery.
threads. We embroider in each stitch, in the shape of the letter X. It would be better if you
first practiced on a sample, and then embroidered X on panties.

You can embroider any pattern you want. Unfortunately I can’t explain

your embroidery. First I drew it with a pencil and embroidered it with thread. X-
figurative embroidery is made only with yellow thread.

The buttons will be sewn on with a sewing needle to unbutton and fasten the panties.
Velcro can also be used if desired. Look at the pictures
determine the location of the buttons and sew them on. The buttons are made up of two parts. one
part will be sewn to the top of the panties and the other part to the bottom
panties as pictured below.

If you are going to sew on the Velcro, you should sew on the Velcro with white sewing threads, as in the image below.

Velcro is sewn to the inside of the panties, and the sticky part
sew on foxes. Look at the image.


1) 49 ch, with 2ch from hook 48sc. (1 ch and turn)
2) 48 sp (2 ch and turn)
3) Behind the front wall of the loop, knit 48 ınc-CH in each loop. (2 ch and turn) 48 ınc-CH = 96sc
4) 48sc (At the end of the row we knit a chain of 6 ch and then turning the work
work 1sc on next row. Loop.)
5) 48sc
6) 48 joint ventures
7) For the front wall of the loop, knit 48 ınc-CH. (At the end of the row we knit
a chain of 6 ch and then turning the work we knit 1sc in the next row.
8) 6 We return to the loops of the 6th row and we knit behind the back wall of the loop.
7sc, 12 ch, 10 stitches skip, 14sc, 12 ch, 10 stitches skip,
7sc. (We knit the straps for the hands.)
9-19) 52sc (At the end of the 17th row, we knit a chain of 6ch.) (11 rows)
20) 3 ch, skip 1st stitch and work 1st stitch in next stitch, work to
end of the row.
Buttons are sewn directly on against the loops.

For amigurumi, ready-made hair (tress) will be used, 1 meter will be
enough. The baby has short hair. To do this, long tresses
needs to be trimmed. Enough about 10 cm of hair. Better cut already
on the head, after fastening.

Sew hair in a spiral.

After the hair is completely sewn, we do the hairstyle. Take your hair
with both hands, lightly rub them into the palms and tousle them. Then we sew with fishing line
behind the hair, in a semicircle, (you can use a sewing thread, only
stitches) We do not sew the front part of the hair. If the hair stands on end, then
put your hair to your head and wrap it with salofan and dip your head in hot
water, the hair will lie around the head. (The longer the hair, the easier it is to give it
shape as they are steamed.) If the hair is too long,
needs to be trimmed.)

We start with a chain of 12ch, with 3 ch from the hook, knit 10ch, 3ch turn.
We knit until the full girth of the head, I got 38 rows. Next, sew with
using a needle, and pull to the middle.
EXPLANATION: 12 ch, with 3 ch from the hook, 10ch (38 Rows)
For a bow; 19 VP turn, with 3 VP from the hook 17 CH. Knit 10 rows. Further
tie the whole piece in a circle. ch 3, skip 1 stitch 1sp into next st.
Pull the thread in the middle and sew to the bandana.

The finished bow should look like in the image, and secured with a thread
from bandana.

Additional description of the baby with knitted hair and embroidered


The difference of this baby is that we do not use ready-made hair and eyelashes.
If you do not have tresses or they are difficult to sew on, you can tie your hair,
consisting of 6 curly strands, with Alize diva thread, as shown in the image.
Too many strands can make a child look more like an adult.
The choice is yours.
1) 26 VP, with 2VP from the hook, in each loop we knit PR, RLS to the end
2) Again we dial 26 VP, with 2VP from the hook. (Repeat 6 times in total, should
get 6 strands)
You can change the amount of VP in the strand from 26 to 30. The curls will be short or long.

We sew the hair to the hole where you tightened the thread when tightening.

If you do not have ready-made eyelashes, you can embroider them with a thread. Eyelash – embroidered
black thread, and the thread that we lay on the upper part of the eye is
dark brown thread alize diva.
We will embroider eyelashes, on the side of the eye at 18-19 rads. Number of eyelashes
decide for yourself, according to your desire. At the end, be sure to make up your cheeks

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!