Hello dear Amigurumi Knitting Lovers,Today we share a free amigurumi crochet pattern for you.
As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…
Don’t forget to subscribe to receive notifications of our new free recipes.

Today, the new daily crochet pattern Amigurumi Pikachu Toy Free Crochet Pattern, I want to give you some information about this pattern;

Content
Materials.
Notation.
Head-body. Eye installation.
Head shaping. Drawstrings. Sewing on the mouth and cheeks. Spout installation.
Body extension.
Ears. Two options. + Teaching lesson “Imperceptible color transition”.
Upper paws. Lower paws. Claw embroidery.
Tail. Three options for knitting a tail. + Teaching lesson “How to knit a tail alternately
right and left hand.” Tail assembly.
Assembling Pikachu. Sewing on ears, paws and tail. +Tutorial lesson “Circular
sewing.”
Description of the pokeball. + Tutorials: “Neat ball, no row shift”,
“Color transition. How to tie a flat black stripe.

Materials
Himalaya Dolphin Baby plush yarn or similar. Yellow color 80313: 115 gr. Black
80311 or brown 80336: 15 gr.
For cheeks. Alize Softy. Red color 56.
For claws. YarnArt Jeans. Black color 53.
Filler. Holofiber: 100 gr.
Hook number 4. If YarnArt Dolce No. 4.5. For cheeks No. 3.
Spout 8-10 mm. If there is no spout, file the eye on the sides by 8-10 mm.
Eyes 16-18 mm. Black or colored, like a modern Pikachu.
For the tail. Durable plastic that doesn’t break and bounces back when bent.
Workpiece size: length 21 cm, width 16 cm. Stationery knife / scissors, colored marker.
For the nose. Glue moment: gel/crystal, or second glue moment.
For pokeball. Himalaya Dolphin Baby. Red color: 15 gr. White: 15 gr. Black: 5 gr. Hook
No. 4.
Needle with a wide eye for stitching details.
Contrasting thread, markers and a lighter

Notation
Magic Ring – amigurumi ring.
Ch – air loop, lifting loop.
Sc – single crochet.
Inc – increase.
Dec – decrease.
Sl-st – connecting column.
x – repeat the specified number of times.
Head-body, legs are knitted in a spiral in the form of an oval.
Ears in a spiral in the form of a circle.
The tail is knitted in turning rows or tied in a spiral in the form of an oval.
Pokeball is knitted in the round with connecting rows

Head-Body

1. Chain of 7 ch. From the 2nd loop from the hook: 5 sc, 3
   sbn in the last loop. On the reverse side
   chains: 4 sc, etc. Mark the end of the row with a marker
   (fourteen)
   Where the needle is the correct beginning of the next row.
2. inc, 4 sc, inc x 3, 4 sc, inc x 2 (20)
3. 1 sc, inc, 4 sc, (1 sc, inc) x 3, 4 sc, (1 sc, inc) x 2 (26)
4. 2 sc, inc, 4 sc, (2 sc, inc) x 3, 6 sc, (inc, 1 sc) x 2 (32)
5. 2 sc, inc, 7 sc, inc, (3 sc, inc) x 2, 7 sc, inc, 3 sc, inc,
   1 sc (38)
   6-10. 38 sc – 5 rows.
6. 18 sc, inc x 4, 2 sc, inc, 2 sc, inc x 2, 2 sc, inc, 2 sc,
   inc x 4 (50)
   The selected two increments from this series should
   be in the middle of the muzzle – there will be a nose

12-14. 50 sc – 3 rows.

15. (dec, 17 sc, dec, 4 sc) x 2 (46)
16. 1 sc, dec, 14 sc, dec, 5 sc, dec, 14 sc, dec, 4 sc
    (42)
17. 2 sc, dec, 9 sc, dec, 7 sc, dec, 11 sc, dec, 5 sc
    (38)
18. 3 sc, dec, 6 sc, dec, (8 sc, dec) x 2.5 sc (34)
19. 18 sc, dec, (1 sc, dec) x 3, 5 sc (30)
20. 13 sc, dec, (1 sc, dec) x 5 (24)
21. 15 sc, inc x 8, sc (32)
22. 32 sc
23. (7 sc, inc) x 4 (36)
24. (8 sc, inc) x 4 (40)
25. 40 sc
26. (9 sc, inc) x 4 (44)
27. 44 sc

Stuff your head. Try on eyes. Insert eyes
between 9 and 10 rows. Above the selected 2 sc,
which are in the 11th row.
Take your time. Fill your head and
check how the eyes look.
Get the filler. Put eyes on
plugs. Set the legs on fire with a lighter. When
melt – press, making a hat. See
photo below.
The spout was inserted later, after tightening, on glue. If a
want to insert now – install in the 11th row,
between two additions.
Fill your head with holofiber again. More
in cheeks. It is good to fill the neck, so that later
hanging out.

Decor
Tightening under the eyes:

1. Cut off about 40 cm of yellow plush or
   another yellow yarn.
2. Red dots – where to enter / withdraw
   needle. The numbers are steps.
3. Low points are between 20 and 21
   beside. This is the transition point from the head to the body.
   Distance – 1 sc. Located exactly below
   top points.
4. Insert the needle into the lower left point.
5. Draw on the left near the eye. Leaving the thread
   for tying. Further according to the scheme in the photo.
6. We repeat the tightening of one eye twice.
   The first time we tighten slightly. Second how
   you want it to look tight.
7. We tie the ends of the threads and bring them to the neck.
   We repeat the same with the second eye.

Utyazhka near the spout + hole for the mouth:

1. The bottom two points are located between 15 and
   16 side by side. This is where the hole for the mouth will be.
2. High points are between 10 and 11
   beside. Over two increments.
3. Distance between all points – 1 sc.
4. Insert the needle into the lower left point.
5. Draw between 10 and 11 side by side, to the top
   left point. Further according to the scheme in the photo.
6. Near the spout we make the tightening weaker. At the bottom
   pull harder to get
   fossa.
7. After the 6th stage in the scheme, we exit at the bottom, but do not
   where the tail of the thread is, but nearby. Slightly
   tighten the strings and tie tighter,
   to make the hole deeper.
   The eyes in the photo are still without tightening

Tightening the upper part of the mouth:

1. The lower points are on the 14th row.
2. The points above are between 10 and 11
   beside. Over two increments.
3. Distance between all points – 1 sc.
4. We find the central column in the 14th row.
5. Insert the needle to the left of the center
   column. Further according to the scheme.
6. At the end we pull up two tails and
   we tie it so that the column drowns a little
   and got the upper part of the mouth. knot
   tighten slowly to make the desired
   degree of tightening.
   In the photo, the column is already recessed. It’s ready
   version of what should happen after
   all weights

Cheeks
Alize Softy. Red color. Hook number 3.

1. 6 sc in magic ring or ch 2, in the 2nd loop from the hook: 6 sc.
2. inc x 6 (12)
3. (1 sc, inc) x 6 (18), sl-st.
   We cut the thread. Leave for sewing.
   Pull out the loop.
   If you knit from thinner yarn – you need to knit
   further to the required circle size:
4. (2 sc, inc) x 6 (18)
5. (3 sc, inc) x 6 (18), sl-st.
   Leave the thread for sewing.
   For convenience, I use a thread to
   mark the end and the beginning of the row.
   Sew spots on the cheeks.
   Carefully cut off excess pile.

Mouth

1. 2 in. In the 2nd loop from the hook: 4 sc, 1 ch
2. Turn knitting on the reverse side
   we knit columns: 4 sc, ch and pull the thread.
   Cut the thread, leaving for sewing.
   Below are two design options
   mouth. Choose which one you like or
   arrange it your way.
   Take the time for a neat and beautiful
   design

Mouth
First option.

1. Trying on a mouth to look good.
   We fasten with pins and sew under the mouth.
2. Sew, alternately capturing the posts
   head and mouth. Starting from one corner
   mouth to the second corner.
3. With a red thread of 30 cm, make a double stitch
   in the mouth – tongue.
4. For a light smile, you can make a tightening
   corners of the mouth. Scheme in the second version of the mouth.
5. Apply glue to the spout. We insert in the 11th row –
   between two additions. In the photo, the nose is inserted
   over two additions. Looks better if
   insert a little lower – between two increments

Mouth
Second option.

1. We try on the mouth, fix it with pins and
   sew under the mouth.
2. Sew on, alternately grabbing
   head and mouth columns. We start from one
   corner of the mouth to the second corner.
3. Apply glue to the spout. We insert in the 11th row –
   between two additions.
4. Next, we tighten the corners of the mouth.
   In the photo, the mouth is already tightened.

Tightening the corners of the mouth:

1. Cut off about a meter of yellow thread.
2. The green circle is the beginning. Red is the end.
   Distance between circles – 1 sc.
3. Numbers – where to insert / withdraw the needle.
4. Insert the needle between 20 and 21 next, in green
   point. We derive where the number is 1. Leave the tip
   threads for tying.
5. From 1 we insert the needle into 2.
6. From 2 to 3. The number 3 is the corner of the mouth.
7. From 3 to 4. Number 4 – one row higher and 1 sc
   to the left.
8. From 4 to 5. The place of the number 5 is where
   number 2. Place number 6 – where 1. Pull up the thread,
   forming the corner of the mouth. Further according to the scheme.
9. When you reach the number 11 – pull the thread,
   forming the second corner of the mouth.
10. After the number 12, go to the red circle.
    Tie the ends of the threads and hide.

We continue the body
28.2 sc. We change color. Insert hook into
next loop, pull the thread – on
hook two yellow loops. Capturing the thread
black and draw through two yellow
loops. This is the 3rd sc. We knit another 7 sbn, inc, 6 sbn.
We cut the yellow thread, leaving 5-6 cm. Change
color. Insert hook into next stitch and
we take out a black thread – there are two on the hook
black loops. We pass a thread through them
yellow color. It turned out the 7th sc. Knit 3 more
sc, etc. Further according to the scheme: (10 sc, inc) x 2 (48)
About the change of color I will write in which column
change.
If you change in the 8th sc, this means: insert the hook into
loop where the 8th sc should be and get the old one
thread, and then through two loops on the hook to enter
new color. Color change is always obtained in
the last column of the old color.
29.2 sc. Change to black in the 2nd sc. yellow
cut off. 18 sc in black, 28 sc in yellow. Change to
yellow in 18th sc. Black cut (48)
We tie the ends of the threads. Tighten slightly to
the columns remain in place.

30. (11 sc, inc) x 4 (52)
31. 52 sc
32. (25 sc, p) x 2 (54)
33. 4 sc in yellow, 17 sc in black. Change to black at 4-
    m sc. 33 sc in yellow. Change to yellow in the 17th sc (54)
34. 3 sc in yellow, 19 sc in black. Change to black at 3-
    m sc. 32 sc in yellow. Change to yellow in the 19th sc
    black (54

35-38. 54 sc – 4 rows.
We knit decreases on the sides.

40. dec, 24 sc, dec, 26 sc (52)
41. 1 sc, dec, 20 sc, dec, 2 sc, dec, 20 sc, dec, 1 sc (48)
    We stuff in the course of knitting. Put the Pikachu on
    stomach. Stuff your neck tightly. Especially the place
    transition to the body, where there are the fewest loops. Then
    put it on your back and stuff further.
42. 1 sc, dec, 18 sc, dec, 2 sc, dec, 18 sc, dec, 1 sc (44)
43. 1 sc, dec, 17 sc, dec, 1 sc, dec, 17 sc, dec (40)
44. 1 sc, dec, 15 sc, dec, 1 sc, dec, 15 sc, dec (36)
    Stuff more on the sides, forming the top
    part of the leg – thighs.
45. 1 sc, dec, 13 sc, dec, 1 sc, dec, 13 sc, dec (32)
46. ​​1 sc, dec, 11 sc, dec, 1 sc, dec, 11 sc, dec, sl-st (28)
    Cut the thread. Pull out the loop. sew with a needle
    hole in both walls. Fasten the thread and
    hide

Ears
First option.
Black color.

1. 3 sc in magic ring or 2 ch, in the 2nd loop from the hook: 3
   sc
   2.inc x 3 (6)
2. (1 sc, inc) x 3 (9)
   4-6. 9 sc – 3 rows
   In the third row, at the end of the row we knit ss.
   Cut the thread, pull the loop.
   Change color to yellow. Color change can be
   do it in the usual way, or you can do it
   imperceptible transition. See how to make it
   below.
   With the end of a hook or pencil, gradually
   we stuff the ear. The part must be soft.
3. 9 sc
4. 3 sc, inc, 4 sc, inc (11)
   9-15. 11 sc – 7 rows
   Fold two walls in half and knit 4
   sbn, ss.
   We cut the thread, leaving 40-50 cm

Invisible color transition.
7 row. From sl-st in the 6th row, count two loops to the right. Insert hook into this loop. Get the thread
yellow color. Make vp. This ch is considered the first loop / sc of the 7th row. Into the next loop
we knit sbn. Next comes ss. Knit sb in it too. A total of 3 sb knitted. We knit 6 more sc.
We put a marker on the last column (9)
Tie the ends of the threads and hide.
8 row. We introduce the hook behind the back wall of the ch and knit sbn. The back wall is tightly closed. Need
pull up with a stitching needle so that the hook can be passed through. We knit 2 more sc, inc, 4
sc, inc (11)
9-15 row. 11 sc – 7 rows.
We fold the two walls in half and knit 4 sbn, ss.
We cut the thread, leaving about 50 cm.

Ears
Second option.
Black color.

1. 3 sc in magic ring or 2 ch, in the 2nd loop from the hook: 3 sc
   2.inc x 3 (6)
2. (1 sc, inc) x 3 (9)
3. Insert the hook into the next loop, take out
   thread of the old color. Through two blacks on the hook
   we spend yellow – it turned out 1 sb. Knit 3 more
   sbn yellow, 5 sbn black. Change to black in the 3rd
   sbn. Color change is always obtained in the last
   old color column (9)
4. 5 sc in yellow, 3 sc in black, 1 sc in yellow. Change
   on yellow in the last sc of the last row. On the
   black – in the 5th sbn yellow.
5. 6 sc in yellow, 1 sc in black, 1 sc, inc in yellow (10)
6. 4 sc, inc, 5 sc (11)
7. 11 sc
8. 4 sc, dec, 5 sc (10)
   10-14. 10 sc – 5 rows
9. 1 sb. We do not finish the series.
   The black tip of the ear should look oblique.
   If it looks wrong – tie how much
   you will need single crochets.
   Fold two walls in half and knit 4-5
   ss. We cut the thread, leaving 40-50 cm.
   When knitting the second ear, the slope of the black will
   correct, but the color transition will change. For
   the same transition of colors – the second ear is needed
   knit with your left hand. Do you know another way
   please share

Upper paws

1. 5 ch. From the 2nd loop from the hook: 3 sc, 3 sc in
   last loop, 2 sbn, etc. We put a marker (10)
   The correct one is marked with a needle in the photo below.
   the beginning of the second row.
   2-3. 10 sc – 2 rows
2. 2 sc, inc, 7 sc (11)
   5-9. 11 sc – 5 rows.
   Hit hard.
   10.2 sc. We do not finish the series.
   Fold the hole in half and knit 4 sc, sl-st.
   Leave 40 cm for sewing

Lower paws

1. 5 ch. From the 2nd loop from the hook: 3 sc, 3 sc in
   last stitch, 2 sc, inc. We put a marker (10)
   2-9. 10 sc – 8 rows
   Fill the part loosely.
2. (1 sc, dec) x 3, sc, sl-st (7)
   Leave 50 cm for sewing.
   With a needle for stitching, we go in turn under
   front walls of seven loops, without tightening. After
   7th loop pull the hole. See photo below.
   Fasten the thread near the tightened hole.
   Slightly to the side from the center

Claws
Yarnart Jeans or Iris. Black color. Cut 4 strands of 30 cm.
We embroider the lower paws as shown in the photo.
The side from which the thread for sewing on the foot was brought out will be the front. That’s why
we introduce a needle with black color on the other side.
We insert the needle, leaving the tip of the thread, and bring it out on the other side, right above the place where
where they went.
Then we insert the needle again where the tip of the thread is and bring it out to the place where the second will be.
claw.
We embroider the second claw and bring the thread to the beginning, to the second tip.
We tie the two ends of the thread and hide.
Repeat with the second lower foot.
Embroider the upper paws according to the same pattern, adding one / two claws

Tail
Three options for knitting a tail
In the first version, the tail is knitted in turning rows. One row turns out front,
second purl. Two identical halves are knitted. Then the halves are folded
and tied around the edges. Plastic is inserted between the halves.
In the second version, the same thing: two halves, inside of which there is plastic. But the tail is tied
alternately with the right and left hand. If you connect the left hand in the purl rows –
knitting will be completely facial. After each row, knitting does not need to be turned.
You need to change the hook.
In the third version, the plastic is tied in a spiral. Knitting starts with an oval
motive. The tail is light and looks like a real Pikachu.

Tail
Option 1.
We knit in turning rows. Yellow.

1. 12 ch. From the 2nd loop of the chain: 11 sc, ch. We turn
   knitting.
   In subsequent rows, after ch we turn knitting.
   2-5. 11 sc, ch – 4 rows
2. 5 sc, ch. We do not knit a row.
   7-11. 5 sc, ch – 5 rows.
   In the 11th row, in the loop where the 5th sc should be, we enter
   hook and take out the yellow thread. Through two loops
   yellow we draw a black thread. We knit in
   We continue with black, do not cut off the yellow.
   In the photo, the tail is connected with option 2. Tie 4 rows
   right hand and see if you like being alone
   front row, and the second purl.
3. 6 ch. From the 2nd loop from the hook: 6 sc. In the 6th sc, change the color to yellow. Black is not cut off.
   Further in a straight line, along the side: 4 sc, ch (10)
4. 10 sc, ch. In the 5th sc, change the color to black.
5. 10 sc, ch. In the 6th sc, change to yellow.
6. 10 sc, ch. In the 5th sc, change to black.
   Cut off the yellow.
   We fix the end of the thread or tie it with the black end of the thread to a knot.
7. 2 ch. From the 2nd loop from the hook: 2 sc. Next 3 sc straight along the side, ch (5)
   17-18. 5 sc, ch
   Cut the thread, fasten and hide. Leave for sewing is not necessary.
   We knit the second half of the tail according to the same pattern. But the ends are from yellow and black yarn
   we bring it out and fix it on the other side so that on the two halves they hide inside
   knitting.
   See the photo and assembly description at the end of the second knitting option. There is also a photo
   how to change the color and a little photo on knitting halves of the tail

Tail
Option 2.
Yellow. Right hand.

1. 12 ch. From the 2nd loop of the chain: 11 sc, ch.
   Knitting is not rotated, but simply rearranged
   hook as shown in the pictures below.
   2nd row knit with the left hand. 3rd row knit
   right. Then left again. Next we alternate.
   From right to left – right hand. From left to right –
   left hand.
   2-5. 11 sc, ch – 4 rows.
2. 5 sc, ch. We do not knit a row.
   The photo below was taken when knitting the first
   tail halves

7-11. 5 sc, ch – 5 rows.
In the 11th row, in the loop where the 5th sc should be, we insert the hook and take out the yellow thread.
We attach the black thread and stretch it through two loops of yellow on the hook. We knit in
The photos were taken while knitting the second half of the tail.
What is the difference between the halves of the tail, see below. Knit in the same way, but in different directions

We continue with black, do not cut off the yellow.

12. 6 ch. From the 2nd loop from the hook: 6 sc. In the 6th sc, change the color to yellow. Black is not cut off.
    Further in a straight line, along the side: 4 sc, ch (10)
13. 10 sc, ch. In the 5th sbn change color to black

14. 10 sc, ch. In the 6th sc, change to yellow
15. 10 sc, ch. In the 5th sc, change to black.
    Cut off the yellow. We fix the end of the thread.
16. 2 ch. From the 2nd loop from the hook: 2 sc. Next 3 sc straight along the side, ch (5)
    17-18. 5 sc, ch
    Cut the thread, leaving no for sewing. Fasten and hide.
    Ignore the black ends that come from the tail in the photo below. They are not
    needed.
    We knit the second half of the tail according to the same pattern. But we start the first row with the left hand.
    Second row from the right hand. Third row again from the left.
    The main thing to remember: from left to right – left hand, from right to left – right hand.
    Below, in the first photo, the number 1 marks the first half of the tail. First row of the first
    halves began to knit from the right hand.
    Number 2 marks the second half. The first row of the second half of the tail will begin
    knit with left hand

tail assembly
Cut out the plastic according to the shape of the tail. It should be slightly smaller than the tail at the edges.
Be careful when working with a knife. Can be cut with scissors.
See photo below.

Make holes in the plastic so that you can
pass your sewing needle.
We will sew the tail through the holes.
I made holes all over the strip, but they came in handy
only 3-4 top.
Make one or two holes in the other strip. In the photo of them
can not see. Marked with red circles where they should
to be.
The arrows indicate which holes to insert the needle into,
to securely sew the tail.
The holes were made by heating the wire.
Clamped in pliers and heated over gas.
Fold the two pieces of the tail and tie. Where yellow – yellow thread. Where black – black.
When the yellow thread is attached – do ch.
Tie the yellow threads indicated by the arrow.
I put markers in the corners for easy tying.
I inserted the plastic when I tied it to the place in the third photo

In the last yellow loop we knit ss. We cut the thread. Leave 5-6 cm for
tying.
Let’s move on to black. We attach the thread and knit ch.
In the last black loop we knit ss. We cut the thread, leaving 5-6 cm.
Tie the ends of the threads and hide

Tail
Option 3.
The tail is tied around the plastic. As a result
it turns out easier and like a real character.
I used plastic from a bucket lid. How
option: containers, wide bottles from
detergents, folders. Possibly in the house
there will be something else.
If the thickness is not enough – glue two
halves with waterproof glue. Can be strengthened
only half of the tail coming from the base.
Determine if there is enough thickness at the base
tail, you can after you tie the beginning
tail. In the middle of knitting, my tail became
bend strongly, so I glued it
extra piece of plastic. From foundation to
middle.
Draw a tail like Pikachu. You can attach plastic to the screen and circle the tail along
picture. See below. The picture is clickable – the image will open in Yandex.
Make initially the exact or desired workpiece, so as not to redo it later.
Cut the tail along the contour with a clerical knife or scissors. What to cut depends on
plastic thickness. Be careful when working with a knife.
Sharp corners are slightly rounded. Can be pasted over with adhesive tape to
plastic did not pierce knitting.
Make holes in the base of the plastic. Needed for a tighter sewing of the tail to
body. The more holes, the more secure the tail is. See photo of holes below.

We tie from the top of the tail:

1. We knit a chain from Vp. It should be equal to the length of the side of the plastic. see photo
   below. When the chain is equal to the length of the side of the plastic, tie another 2 ch. I have
   it turned out 12 in. You may have a different number of loops. Depends on the workpiece.
   Next, we knit with an oval motif, as we knitted the beginning of the head. From the second loop from the hook
   we knit sbn, without decreases and increases. In the last loop 3 sc. Continue on the back
   knit single crochet.
2. New row – we knit just sc. We make adjustments if necessary. We make a decrease where the rib is
   plastic. At this point, it will be noticeable whether a reduction is needed or not. Reductions are needed in order to
   knitting was tight to the plastic. The third photo shows that there are details on the edge
   the rest – we make a decrease. Always, when you get to the edge of the plastic, see if there is
   extra loops. If there is – a reduction. When knitting along the edge, you do not need to make reductions.
   The first two or three rows can be knitted without plastic. Next, we tie, without removing the knitting from
   plastic

When knitting rests against the corner of the plastic, as in the first photo – we knit a chain of equal
side length, plus 2 ch.
We tie as before: from the second loop. At the end of the first side, three loops in one are not needed.
Just sbn, deductions and increases, if required. Improvisation 🙂
We try to tie it tighter so that the intended shape of the tail remains the same, with all
curves and corners. But do not overdo it so that during the game the plastic does not accidentally
got out.
When we rest against the corner of the plastic, we knit a chain of ch equal to the length of the side, plus 2 ch.
If, on the other side of the chain, they saw that the chain was not enough, make an increase or
unravel the chain by knitting another spare loop. Get three spares instead of two.
When we reached the place in the fourth photo, we knit connecting posts on both sides.
We knit to the corner. Thus we close knitting

At this stage, I checked how the tail with yarn bends and decided to strengthen the base.
I cut out an additional part of the plastic and glued it with waterproof glue to the main part
plastic.
See photo below.

We tie the next part of the plastic with single crochets to the corner.
Through two yellow we introduce a new color. Black or brown.
We knit a chain plus 2 spare.
We mark the border of flowers. We will be guided by it when doing a color change.
We do not cut the yellow and black thread.
In the third photo, when we reached the color change mark, we draw a thread through two black ones
yellow color. Color change – in the last loop of the old color.
When the colors change, tighten the threads. Take the old one to the other side, so as not to interfere.
If on the edge or on the corner of the plastic you see that the knitting is too tight – do
increase. The corner will become softer and will not come out when the child is playing.

On the other side, we also mark the border of colors and go back to black.
When tied with connecting posts to the corner – cut the yellow thread and tie
thread ends. The tip of the thread from attached black and cut off yellow.
We continue only with a black thread. We tie the plastic to the end. No chains. We regulate
knitting with decreases and increases along the edges of the plastic.
It is convenient to make decreases with another option: insert the hook into one loop and get the thread, then
in the next – three loops on the hook. Through three to carry out the fourth. It turns out a reduction.
At the end, we close the knitting with connecting posts on both sides.
Try on the tail to the body.
When I tried it on, I decided that the base needed to be shortened a little and cut off the roundness.
The holes were redone. See last photo.
Make the initially desired blank, so as not to dissolve knitting later

Assembling Pikachu
We fix the paws, ears and tail with pins.
We try different options until we find the right one.
Take the time to try on all the details for the toy.
We make marks on the body and gradually sew everything

Sew on the ears in a circular fashion between 2 and 6 side by side.
We insert the needle into the head, under the ear, as in the first photo. We take it out from the other side.
Next, insert the needle into the base of the ear.
On the other hand, we introduce again into the head, under the ear.
Sew from left to right / right to left, and then repeat in the opposite direction. so ear
will be easy to bend and return shape.

Sew on the upper paws, as in the photo, retreating one or two rows from the neck.
First we sew one side, as shown in photos 1, 2.
Then we pass to the other side – photo 3.
Alternately we pick up the columns of the foot and body.
We reach the end, then we repeat back

We arrange the lower paws so that Pikachu stands and does not fall.
We sew, alternately capturing the columns from above and below.
We sew, not reaching the edge of the front and back of the foot. This is what the paw looks like
more natural.
Repeat the second round to secure the foot

Cut off 50 cm of black thread.
We retreat one row from the black strip and fasten the tail with pins.
We sew in a circular way, like ears. We move from top to bottom and back.
Insert the needle into the body, near the tail. We carry out in the body under the tail and output from the other
side, near the tail.
We introduce into the tail through the holes in the plastic. We take it out from the other side.
Next, we introduce it into the body again.
It is not always necessary to insert the needle through holes in the plastic.
You can sometimes grab knitting near the plastic.
In the second photo, the tail below is not completely sewn. Be sure to sew to the end. Else tail
move slightly to the side

Pokeball
We knit in a circle with connecting rows.
Where the series began, it closed there, on the same line.
We finish each row with a connecting column + one air loop.
The connecting column is the closing one.
Rows don’t move. The ball is neat. The black stripe is perfectly even.
Red color.

1. 2 ch, in the 2nd loop from the hook: 6 sc. Put a marker on the first sc.
   At the end, connect the row with a connecting column and knit ch. sl-st knit in a loop
   first sc. The first column was marked with a marker.
   In subsequent rows, when the first sb is tied, put a marker on it.
   At the end of the row, into the loop where the marker is knitted sl-st + ch and the first sc is knitted into the same loop
   new row.
2. inc x 6, sl-st, ch (12)
3. (1 sc, inc) x 6, sl-st, ch (18)
4. (2 sc, inc) x 6, sl-st, ch (24

. (3 sc, inc) x 6, sl-st, ch (30)

6. (4 sc, inc) x 6, sl-st, ch (36)
7. (5 sc, inc) x 6, sl-st, ch (42)
8. (6 sc, inc) x 6, sl-st, ch (48)
9. 48 sc, sl-st, ch
   At the end of the row, in the connecting column, change the color to black.
   We insert the hook into the loop where the sl-st should be and take out the thread of the new color. We pass through
   one loop on the hook of the old color. SS is ready. We knit in
   We do not cut the red thread. See photo below.
10. 48 sc, sl-st, ch
    We knit a flat black stripe. Pull up a red loop and knit
    black thread. How convenient it is to knit with two threads – see the last photo.
    Cut off the red thread at the end.
11. 48 sc in black, sl-st, ch.
    We knit the connecting column for closing the row in white.
12. 48 sc, sl-st, ch. We knit an even strip of white color similarly to the 11th row. Pull out
    black loop and knit with white thread

13-14. 48 sc, sl-st, ch – 2 rows

15. (6 sc, dec) x 6, sl-st, ch (42)
16. (5 sc, dec) x 6, sl-st, ch (36)
17. (4 sc, dec) x 6, sl-st, ch (30)
    We fill, adding a little bit after each row.
18. (3 sc, dec) x 6, sl-st, ch (24)
19. (2 sc, dec) x 6, sl-st, ch (18)
20. (1 sc, dec) x 6, sl-st, ch (12)
    Dec 21, 6
    Pull the hole.
    With a needle for stitching, we go in turn under the front walls of the 6 loops, without tightening. After
    6th loop pull the hole. Fasten the thread near the tightened hole and hide.
    Button.
    Black circle.
21. 2 ch, in the second from the hook: 6 sc
    2.inc x 6 (12)
22. (1 sc, inc) x 6 (18)
    Try on a pokeball. You might not need another row.
23. (2 sc, inc) x 6, sl-st (24)
    Leave the thread for sewing.
    White circle.
24. 2 ch, in the second from the hook: 6 sc
25. inc x 6 (12)
    Perhaps the third row is not useful.
26. (1 sc, inc) x 6, sl-st (18)
    Leave for sewing.
    Sew the white circle to the black.
    The button is ready. Sew to pokeball.
    pokeball ready

YOUR PIKACHU IS READY!