Amigurumi The Ghost Bunny Free Crochet Pattern

Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Today, the new daily crochet pattern Amigurumi The Ghost Bunny Crochet Pattern, I want to give you some information about this pattern;

size

15 cm using the recommended hook and yarn

material

DK Cotton by Ricorumi (25 g / 57 m) in each of the following
colors:
001 white (x2), 011 pink (x1), 056 nougat (x1), 057 chocolate (x1),
060 black (x1), 061 ivory (x1)
2.5 mm hook
3 mm hook
Some blusher
Yarn needle
Stich markers
Polyester fiberfill

abbreviations

ch : chain
sl st : slip sittch
sc : single crochet
hdc: half double crochet
dc: double crochet
inc : increase by making 2 single crochet in the same stitch.
dec : decrease = insert your hook in the front loops of next 2 stitches, yarn over, pull loop through both stitches, yarn over, pull loop
through both loops.
BLO: back loop only
FLO: front loop only

head

Using color 056 (nougat) and the 2.5 mm hook, make a magic ring:
01 sc 7 into the ring (7)
02 inc x7 (14)
03 (sc 1, inc) x7 (21)
04 (sc 2, inc) x7 (28)
05 (sc 3, inc) x7 (35)
06 (sc 4, inc) x7 (42)
07-11 (5 rounds) sc around (42)
12 (sc 5, inc) x7 (49)
13-17 (5 rounds) sc around (49)
18 (sc 5, dec) x7 (42)
19 (sc 19, dec) x2 (40)
20 (sc 2, dec) x10 (30)
Stuff the head firmly.
21 (sc 1, dec) x10 (20)
22 dec x10 (10)
Finish stuffing.
Fasten off, leaving a long tail. With a yarn needle, make a whip stttch in the
front loops of the last 10 sttches and tghten to close the hole. Weave in end.
Using color 060 (black), embroider smiling eyes on round 12, leaving 7 sttches
between them.
Using color 011 (pink), embroider the cheeks between rounds 13 & 14, 2
sttches wide, in the corner of the eyes.

muzzle

Using color 061 (ivory) and the 2.5 mm hook, make a magic ring:
01 sc 6 into the ring (6)
02 inc x6 (12)
03 (sc 1, inc) x6 (18)
Fasten off, leaving a tail for sewing.
Using color 011 (pink), embroider the nose between rounds 2 & 3, 2 sttches
wide.
Using color 057 (chocolate), embroider a smiling mouth between rounds 2 & 3.
Sew the muzzle between rounds 12 & 17, centered between the eyes.,

muzzle

ears (make 2)

Using color 056 (nougat) and the 2.5 mm hook, make a magic ring:
01 sc 6 into the ring (6)
02 (sc 1, inc) x3 (9)
03 (sc 2, inc) x3 (12)
04 sc around (12)
05 (sc 3, inc) x3 (15)
06-11 (6 rounds) sc around (15)
12 (sc 3, dec) x3 (12)
13 sc around (12)
Fasten off, leaving a tail for sewing.
Fold the ears in 2 and sew them on each side of the head, between rounds 5 & 7

legs (make 2)

Using color 056 (nougat), make a magic ring:
01 sc 6 into the ring (6)
02 inc x6 (12)
03 BLO sc around (12)
04 sc 2, dec x4, sc 2 (8)
05 sc around (8)
Change to color 001 (white):
06 BLO sc 2, inc x4, sc 2 (12)
07-12 (6 rounds) sc around (12)
Stuff the legs firmly.
1 st leg: fasten off and weave in end.
2nd leg: don’t fasten off, conttnue with the body!

body

At the end of leg 2, make a few sc (I made 4): you should now be in the middle
of the inner part of the leg:
13 ch 3, sc 1 in leg 1 (in the middle of the inner part), sc 4, inc, sc 5, inc,
on the other side of the ch 3: inc, sc 1, inc, back on leg 2:
(sc 5, inc) x2 (36)
Place your stttch marker here!
14-21 (8 rounds) sc around (36)
22 (sc 10, dec) x3 (33)
23 (sc 9, dec) x3 (30)
24 (sc 8, dec) x3 (27)
25 sc around (27)

26 (sc 7, dec) x3 (24)
27 (sc 4, dec) x4 (20)
Change to color 056 (nougat):
28 BLO sc around (20)
Fasten off, leaving a tail for sewing.
Sew the head on the body.

leg cuffs (make 2)

Using color 001 (white), hold the body upside down and insert your hook in
the front loops of round 6 of the legs:
01 (ch 2, sl st 1) x8
Fasten off and weave in end.

arms (make 2)

Using color 056 (nougat) and the 2.5 mm hook, make a magic ring:
01 sc 6 into the ring (6)
02 (sc 2, inc) x2 (8)
03 sc around (8)
Change to color 001 (white):
04 sc around (8)
05 BLO sc around (8)
06-13 (8 rounds) sc around (8)
Fasten off, leaving a tail for sewing.
Lightly stuff the end of the arm.
Sew the arms on each side of the body, between rounds 26 & 27.

arm cuffs (make 2)

Using color 001 (white), hold the body upside down and insert your hook in
the front loops of round 4 of the arms:
01 (ch 2, sl st 1) x8
Fasten off and weave in end.

tail

Using color 056 (nougat) and the 2.5 mm hook, make a magic ring:
01 sc 6 into the ring (6)
02 inc x6 (12)
03 dec x6 (6)
Fasten off, leaving a tail for sewing.
Sew the tail at the back of the body.

Henry is ready… Let’s make his ghost costume!

cape

Using color 001 (white) and the 3 mm hook, chain 32 and begin in the 3rd stttch
from hook:
01 hdc 30, ch 2, turn (30)
02 hdc 1, hdc-inc, (hdc 8, hdc-inc) x3, hdc 1, ch 2, turn (34)
03 hdc-inc, (hdc 10, hdc-inc) x3, ch 2, turn (38)
04 hdc 1, hdc-inc, (hdc 11, hdc-inc) x3, ch 2, turn (42)
05 hdc across, ch 2, turn (42)
06 hdc 1, (hdc 9, hdc-inc) x4, hdc 1, ch 2, turn (46)
07 hdc across, ch 1, turn (46)
08 sl st in 1st, [(hdc 1, dc 1) in next st, ch 3, sl st in 1st ch of ch 3, (dc 1,
hdc 1) in next st, sl st in next st] x15
Fasten off, leaving a tail for sewing.

mouth

Using color 060 (black) and the 2.5 mm hook, ch 10 and begin in the second
ch from hook:
01 sl st 1, sc 1, hdc 1, hdc-inc, dc 1, hdc-inc, hdc 1, sc 1, sl st 1
Fasten off, leaving a tail for sewing.
Sew the mouth on the front of the cape, in the middle, and embroider 2 teeth
using color 001 (white)

eyes (make 2)

Using color 060 (black) and the 2.5 mm hook, make a magic ring:
01 sc 4 into the ring (4)
Fasten off, leaving a tail for sewing.
Sew the eyes above the mouth.

hood

Using color 001 (white) and the 3 mm hook, chain 8 and begin in the 2nd stttch
from hook:
01 sc 6, sc 3 in last, on the other side of the chain: sc 6, ch 1, turn (15)
02 sc 6, inc x3, sc 6, ch 1, turn (18)
03 sc 6, (sc 1, inc) x3, sc 6, ch 1, turn (21)
04 sc 6, (sc 2, inc) x3, sc 6, ch 1, turn (24)
05 sc 6, (sc 3, inc) x3, sc 6, ch 1, turn (27)
06 sc 6, (sc 4, inc) x3, sc 6, ch 1, turn (30)
07 sc 6, (sc 5, inc) x3, sc 6, ch 1, turn (33)
08 sc 6, (sc 6, inc) x3, sc 6, ch 1, turn (36)
09 sc 6, (sc 7, inc) x3, sc 6, ch 1, turn (39)
10 sc 6, (sc 8, inc) x3, sc 6, ch 1, turn (42)
11-15 (5 rounds) sc across, ch 1, turn (42)
Note: on round 16 we are going to make the holes for the ears: adjust the number
of stttches between the 2 holes if needed so that it fits on your bunny.
16 sc 13, ch 6, skip 6 stttches, sc 4, ch 6, skip 6 stttches, sc 13, ch 1, turn (42)
17-20 (4 rounds) sc across, ch 1, turn (42)
21 sl st across, ch 1 (42)
Turn your work 90° to crochet along the bodom border of the hood: there are 42
sttches along this border:
22 dec x 21 (21)